Application areas and instructions for use

The terralin® protect is suitable for disinfecting surfaces and medical devices. As a long-established product, it is used in all hospital areas and can be combined with schülke s&m cleaning additive and schülke s&m care additive. As this product contains cationic active ingredients, the combination with cleaning agents, cleaning additives or wipe care products can affect the microbiological effectiveness and cause problems during application. schülke should therefore be consulted before attempting mixing the products.

Instructions for use: Prepare the working solution in the desired concentration. Wet clean surfaces, e.g. floors and other wipeable surfaces. Ensure complete wetting of the surfaces. Ensure that all visible dirt is removed before disinfection. Allows dosing via centralized and decentralized dosing devices. schülke dosing aids can be used for dosing. After completing the work, dispose of the working solution and clean the equipment thoroughly with water. Depending on the type of floor, additional care may be useful. For professional use only. Any serious incidents related to the product are to be reported to the manufacturer and competent authority. Not for final disinfection of semicritical and critical medical devices!

Product Data and Microbiological Efficacy

Composition:

• 100 g solution contains the following active substances:
• 22 g Alkyl (C12-16) dimethylbenzyl ammonium chloride (ADBAC/BKC (C12-C16)), 17 g 2-Phenoxyethanol, 0.9 g Amines, N-C12-C14 (even numbered)-alkyltrimethylenedi-, reaction products with chloroacetic acid)
• Labelling according to Regulation (EC) No. 648/2004:
• 5 – 15 % non-ionic surfactants, perfumes

Special Advise

USE DISINFECTANT SAFELY. ALWAYS READ THE LABEL AND PRODUCT INFORMATION BEFORE USE.

• Wearing protective gloves is advised.
• Protect from direct sunlight and heat.
• Recommended storage temperature 5-25°C

For further information on safe handling and storage conditions, please refer to the safety data sheet.